Capacitor Continuity Pyrolysis Furnace

Products Detail

Many electronic components and capacitors are present in the dismantled circuit boards of used electronic products. Capacitor pyrolysis can be the capacitor outer layer of plastic wrapping, aluminium shell, rubber, internal grease paper and aluminium foil. Carbonised by high temperature pyrolysis. Eventually the plastic, rubber and grease can be completely sent to charring. Completely removed, leaving only pure aluminium residue. The recycling treatment of capacitor resourcefulness is realised. Capacitor continuous charring furnace is the most effective process and equipment for recycling capacitors. It can continuously feed and discharge. Match with other crushing and sorting equipment. The metal of capacitors can be separated. So as to realise higher economic value.   Capacitors need to be pre-treated for crushing. By passing the waste capacitors through the feeding system, the capacitors enter into the drum of the carbonisation furnace. The inside of the furnace is an almost oxygen-free space. The contents of the charring furnace are heated up to heat the charring.

The smoke generated passes through the flue gas purification system. A burner heats up the main body and the combustible gases circulate again and again to heat the charring. Plastic and rubber are heated for carbonisation. Capacitor oil is gasified and the combustible gases are burned normally. The gases are burned in a cyclic manner and no fumes are emitted. The final products are recycled: aluminium and carbon powder. After a further sorting system. Separation of carbon powder and aluminium. In the middle, a magnetic separator is equipped to select magnetic materials such as iron.  

Raw Materials

Cans, electronic capacitors, aluminium cans, etc.  

Advantageous

1. With convenient operation, easy maintenance, high degree of automation.

2. High degree of separation, the separation effect can be more than 99%.

3. the charcoal furnace adopts fully sealed design, adopts micro-negative pressure, avoids flying dust.

4. Continuous feeding and discharging, continuous production operation, low cost of recycling production

5. Equipped with advanced gas purification equipment, exhaust gas can be discharged after reaching the standard.

6. Equipped with automatic PLC control system, real-time monitoring and control can be realised.  

Technological Process

Capacitors can be treated using the continuous carbonisation oven method. Firstly, the capacitors are put into the carbonisation furnace. And the carbonisation process is carried out. In this process, high temperature is generated in the furnace. So that the plastic, rubber and oil paper undergo carbonisation reaction. It is eventually removed completely. Only pure aluminium residue is left.