Coconut Shell Carbonization Furnace

Products Detail

Coconut shell charcoal made by coconut shell carbonization furnace, high density. Compared with traditional charcoal and coal, it is more resistant to less and burns longer. After feeding through the inlet, the material enters into the internal high temperature carbonization of the carbonization furnace. The moisture in the coconut shell is completely evaporated by the high temperature carbonization, and the carbonised material is sent out through the screw conveyor at the discharge port. After carbonization, the coconut shell retains high composition and has high carbon content.
The complete set of equipment of coconut shell carbonization furnace includes: screw feeder, main body of carbonization furnace, induced draft fan, cooling machine, cooling tower, spray tower, induced draft fan and other parts.

Working principle: after crushing coconut shell. Put into the continuous coconut shell carbonization machine. By the first ignition of the combustible gas produced by the gasifier pre-gas making. Carbonization process back to the plant rate combustible gas to facilitate the secondary combustion. Continuous cycle using the heat generated by the self-burning self-burning. The flue gas produced in the process is purified. No smoke and dust in the production environment. Carbonization furnace has the advantageous features of green environmental protection, high yield and energy saving, and can be produced continuously.

Raw Materials

Coconut Shell Carbonization Furnace is applied to the carbonization of coconut shell, fruit shell, walnut shell, chestnut shell and other materials to produce coconut shell charcoal. It can be used for carbonization treatment of various types of carbonised materials.

Advantageous

1. Coconut shell carbonization furnace is well manufactured, fast charcoal production, good carbonization effect and other advantageous features.

2. The furnace body is made of stainless steel 310s. Can be customised according to customer requirements

3. It has the following features: strong and durable, good heat preservation, good carbonization effect, high temperature resistance, etc.

4. the furnace body adopts double-layer structure design, the inner layer can be physical pre-carbonization of materials, the outer structure of the material for high temperature carbonization

5. The feeding port is set on the top of the furnace, which is convenient for feeding and large volume of pushing material.

6. Rapid cooling device, shorten the charring cycle. Increase processing capacity

Technological Process

The material feedstock is fed into the furnace and dewatered in the inner cylinder of the carbonization furnace. It is prepared for subsequent thermal cracking. Subsequently, it enters the outer cylinder of the continuous carbonization furnace. In the thermal cracking stage. Further heating to thermal cracking temperature. At this point, the biomass decomposes to produce combustible gases and bio-oil as well as solid carbon. Next, in the charring section, the solids are continuously charred at a certain temperature. The fixed carbon rate of the product is increased. Finally, the carbonization is completed to the export and cooling section. The output carbon is effectively cooled. So that it can be exported safely.